Skip to main content
Version: 19.0.0

FA2 Parameters

Formatting the parameters for FA2 entrypoints with Taquito​

Based on the TZIP-12 standard, FA 2 contracts are contracts that handle tokens, whether it be non-fungible or fungible tokens.

In order to be compliant with the standard, a contract (among other requirements) must implement 3 main entrypoints:

  • transfer: an entrypoint to be called to transfer one or multiple tokens from one address to the other
  • balance_of: an entrypoint meant to be called on-chain in order to get the balance of a specific account
  • update_operators: a list of parameters to give or withdraw access to users' tokens from third-parties

Because the transfer and update_operators entrypoints require complex Michelson data, it can sometimes be complicated to find the right formatting for the parameters in JavaScript using Taquito.

Reminder: calling the entrypoint of an FA2 contract​

Once you have the address of the contract you want to update, calling the transfer or the update_operators entrypoint follows the same steps as with any other contract:

import { TezosToolkit } from "@mavrykdynamics/taquito";


const Tezos = await new TezosTooolkit(RPC_URL);
const contract = await Tezos.wallet.at(FA2_CONTRACT_ADDRESS);
const op = await contract.methodsObject.transfer(transfer_params).send();
await op.confirmation();

The transfer entrypoint​

Here is the type signature for the entrypoint parameter in Michelson:

(list %transfer
  (pair
    (address %from_)
    (list %txs
      (pair
        (address %to_)
        (pair
          (nat %token_id)
          (nat %amount)
        )
      )
    )
  )
)

This means that the entrypoint takes a list of pairs annotated with %transfer. Each pair is made on the left side of the account the tokens must be deducted from and on the right side of a second list of transactions holding the recipient of the transfer, the id of the token in question (in case the contract holds multiple tokens with different ids) and the amount to be deducted.

Note: Incidentally, this means that the contract can process multiple transfers at the same time, with one spender sending transfers to multiple recipients for one or different token ids.

In order to format the transfer parameters properly for Taquito, there are only 2 rules to remember:

  • Michelson lists are represented as arrays
  • Pairs in lists are represented as objects whose properties match the field annotations of the pair

The main value of the parameters is an array. Each object in the array will be a different transaction representing the transfer of one or multiple tokens from one spender to multiple recipients. The object has 2 properties: from (the spender's address) and txs (a list of the recipients, token ids and amounts):

const transfer_params = [
    {
        from_: "mv1Hox9jGJg3uSmsv9NTvuK7rMHh25cq44nv",
        txs: [...]
    },
    {
        from_: "mv1NpEEq8FLgc2Yi4wNpEZ3pvc1kUZrp2JWU",
        txs: [...]
    }
]

The txs property itself contains a list of objects holding the recipient's address, the id of the token to be transferred and the amount to transfer:

const transfer_params = [
    {
        from_: "mv1Hox9jGJg3uSmsv9NTvuK7rMHh25cq44nv",
        txs: [
                {
                    to_: "mv1NpEEq8FLgc2Yi4wNpEZ3pvc1kUZrp2JWU",
                    token_id: 0,
                    amount: 11111
                },
                {
                    to_: "mv1NpEEq8FLgc2Yi4wNpEZ3pvc1kUZrp2JWU",
                    token_id: 1,
                    amount: 22222
                },
                {
                    to_: "mv1PTZDARX9rTGpLHNeRgftJaWFiyhc7CwYw",
                    token_id: 0,
                    amount: 333333
                }
        ]
    }
]

You can then add as many transactions as you like to be processed by the contract (within the limits of the gas/storage fee.)

Note: the properties holding the addresses of the spender and the recipient both end with an underscore: from_ and to_.

The balance_of entrypoint​

Here is the type signature for the entrypoint parameter in Michelson:

(pair %balance_of
  (list %requests
    (pair
      (address %owner)
      (nat %token_id)
    )
  )
  (contract %callback
    (list
      (pair
        (pair %request
          (address %owner)
          (nat %token_id)
        )
        (nat %balance)
      )
    )
  )
)

This means that the entrypoint takes a pair annotated as %balance_of. On the left side of %balance_of pair takes a list of %requests structured as a pair of address as %owner and nat as %token_id. On the right side of %balance_of pair takes a contract annotated as %callback which the contract entrypoint type signature will be a list of pairs on the left side of the pair as %request that constructs with an address as %owner and nat as %token_id and on the right side as nat as %balance

const balance_params = {
  request: [
    {
      owner: 'mv19hrERfz4Drj6TXg79DF1ZXZDPwq5igZW7',
      token_id: '0'
    }
  ],
  callback: 'KT1B9bXnsuqZkxbk2fBJbuhRRf1VpcFz2VV7'
}

The update_operators entrypoint​

Here is the type signature for the entrypoint parameter in Michelson:

(list %update_operators
  (or
    (pair %add_operator
      (address %owner)
      (pair
        (address %operator)
        (nat %token_id)
      )
    )
    (pair %remove_operator
      (address %owner)
      (pair
        (address %operator)
        (nat %token_id)
      )
    )
  )
)

As mentioned above, Michelson lists are represented as arrays in Taquito. A union value inside a list is represented as an object with one property: the annotation of the left or right side. The value is then represented as usual in Taquito. In the case of the update_operators entrypoint, the value is an object whose properties are the annotations of the right-combed pair:

const operator_params = [
    {
        add_operator: {
            owner: "mv1Hox9jGJg3uSmsv9NTvuK7rMHh25cq44nv",
            operator: "mv1NpEEq8FLgc2Yi4wNpEZ3pvc1kUZrp2JWU",
            token_id: 0
        }
    },
    {
        remove_operator: {
            owner: "mv1NpEEq8FLgc2Yi4wNpEZ3pvc1kUZrp2JWU",
            operator: "mv1PTZDARX9rTGpLHNeRgftJaWFiyhc7CwYw",
            token_id: 2
        }
    }
]

Just like a transfer operation, it is possible to add and remove multiple operators in the same transaction.

Batching approval and transfer operations​

It can sometimes be useful or more practical to set an operator before sending a transfer transaction. If your dapp is built on a contract that will handle users' transfer operations on their behalf, it can be more convenient for your users to approve your contract and let it transfer their tokens in one click. In this case, you can use the Batch API to first approve the contract and then call an entrypoint of the contract that will transfer the user's tokens on his behalf:

import { TezosToolkit } from "@mavrykdynamics/taquito";


const Tezos = await new TezosToolkit(RPC_URL);
const dappContract = await Tezos.wallet.at(DAPP_CONTRACT_ADDRESS);
const tokenContract = await Tezos.wallet.at(FA2_CONTRACT_ADDRESS);
const batchOp = await Tezos.wallet.batch()
    .withContractCall(tokenContract.methodsObject.update_operators([
        {
            add_operator: {
                owner: USER_ADDRESS,
                operator: DAPP_CONTRACT_ADDRESS,
                token_id: 0
            }
        }
    ]))
    .withContractCall(dappContract.methodsObject.mint())
    .send();
await batchOp.confirmation();

In the first contract call (to the token contract), the user authorizes the dapp contract to transfer his tokens on his behalf. In the second contract call (to the dapp contract), the user calls a hypothetical mint entrypoint that sends a transaction under the hood to transfer the user's tokens to the contract account.

Provide detailed feedback